캔트 코일 스프링

캔트 코일 스프링 씰 개요

캔트 코일 스프링 also known as: Slant Coil Spring, Wire Wound Spring, Wound Spring, Slant Coil.

Handa energizers are Canted (or slanted) Coil springs that produce a very flat load curve when compressed. They are used to energize U-cup seals and other components providing constant predictable loads throughout their wide deflection range. The Slant Coil spring has a flat load to deflection curve which means that the force emitted stays constant over a wide deflection range. This feature makes it perfect for high-speed rotary systems or applications which require tight control of running friction or breakout. It may also be used within devices that require a quick disconnect where many engagement and disengagement cycles are necessary.

Custom sizes and materials are also available.

Materials And Plating available include:

Materials: Stainless steel (e.g., 302, 316), Platinum Iridium, MP35N, Elgiloy®, Beryllium copper, Inconel®, Hastelloy® etc.,

Plating: Gold, Silver, Tin, and Nickel plating available.

For other custom meterials or plating options, click here to contact Handa Spring.

캔트 코일 스프링 치수 데이터

The table below outlines the standard dimensions for canted coil springs. These dimensions are subject to standard manufacturing tolerances, which can be provided upon request.
각 캔트 코일 스프링은 고유한 도구와 다이 세트를 사용하여 생산되므로 모든 유닛에서 정밀도와 일관성을 보장합니다.

"플랫 하중 대 편향 곡선, 거의 제로 압축 세트, 표준 및 맞춤형 크기 사용 가능, 경량, 중형 및 고하중 시리즈."

"모든 사용자 지정 또는 미상장 사이즈에 대해서는 엔지니어링팀에 문의하세요."

Canted Coil Spring Drawing - Handa Spring

시리즈	로드 유형	"A" (금속 와이어)	"B" (미성년자)	"C" (전공)	"T" (컷 길이)	"ID" "(용접 ID)"
HD-CS-L132	L	0.08	0.62	0.70	7.60	1.80
HD-CS-M132	M	0.10	0.62	0.70	7.60	1.80
HD-CS-H132	H	0.12	0.65	0.75	7.70	1.80
HD-CS-L000	L	0.12	1.40	1.55	12.90	2.70
HD-CS-M000	M	0.15	1.40	1.55	12.90	2.70
HD-CS-H000	H	0.20	1.20	1.32	12.20	2.70
HD-CS-L100	L	0.18	2.00	2.40	19.80	4.30
HD-CS-M100	M	0.35	2.00	2.40	20.10	4.40
HD-CS-H100	H	0.35	2.00	2.30	19.80	4.30
HD-CS-L200	L	0.30	2.80	3.20	30.10	6.80
HD-CS-M200	M	0.35	2.80	3.20	30.10	6.80
HD-CS-H200	H	0.40	2.80	3.20	30.10	6.80
HD-CS-L300	L	0.40	4.00	4.50	42.70	9.60
HD-CS-M300	M	0.50	4.00	4.50	42.70	9.60
HD-CS-H300	H	0.60	4.00	4.50	42.70	9.60
HD-CS-L400	L	0.50	5.50	6.00	61.20	14.00
HD-CS-M400	M	0.60	5.50	6.00	61.20	14.00
HD-CS-H400	H	0.70	5.50	6.00	61.20	14.00
HD-CS-L500	L	0.60	8.20	9.20	96.40	22.50
HD-CS-M500	M	0.70	8.20	9.20	96.40	22.50
HD-CS-H500	H	1.00	8.20	9.20	96.40	22.50
HD-CS-L600	L	0.70	11.40	12.80	152.00	37.00
HD-CS-M600	M	1.00	11.40	12.80	152.00	37.00
HD-CS-H600	H	1.20	11.40	12.80	152.00	37.00

How a Canted Coil Spring Works

캔트 코일 스프링, are engineered to deliver consistent force, uniform contact pressure및 multi-directional load support. At 한다 스프링, we specialize in designing and manufacturing custom canted coil springs that meet the highest performance standards for demanding applications.

Canted Coil Spring Deflection | Handa Spring

1.Constant Force Through Working Deflection Range

Canted Coil Spring Deflection Force | Handa Spring

As the spring is further compressed, its load remains relatively constant throughout the working deflection range. This continues until the maximum deflection point, where the individual coils come into contact with one another. Beyond this point, no further deflection is possible.

Unlike traditional sealing elements such as O-rings or V-springs, which exert a force that increases proportionally with deflection, Handa’s canted coil springs provide only the required force needed for mechanical retention 또는 전기 전도성. This results in:

Lower insertion and breakaway forces
Reduced component wear
Longer operational cycle life

This constant force profile is especially valuable in applications involving high mating cycles or sensitive assemblies.

2.Electrical Design Considerations

Canted Coil Spring Plating Data | Handa Spring

In electrical and EMI shielding applications, the performance of a 캔트 코일 스프링 depends not only on its geometry but also on the material and surface finish. Key design factors include:

Base wire material (e.g., stainless steel, Elgiloy®, beryllium copper)
Plating material (e.g., gold, silver, nickel)
Plating thickness

Applying a conductive plating layer over the spring’s wire significantly enhances its 전기 전도성, improves signal integrity, and ensures consistent grounding.

At Handa Spring, we offer a range of plating options to match your specific performance and corrosion resistance requirements.