The bellows seal spring is a kind of sealing device with specific structure and function.And do you know how to install them?
① First, make sure the installation environment is clean and tidy, and prepare the required tools and materials.
② Place the bellows seal spring in the installation location. Before that, it is necessary to clean the installation location and ensure that its surface is flat and smooth.
③ According to design requirements, adjust the direction and position of bellows seal spring. It is usually necessary to ensure that the bellows part corresponds to the sealed part and is perpendicular to the sealing surface.
④ Lightly tighten the mounting nut or retaining ring to achieve the desired compression and seal. Be careful not to over-tighten as this may damage the seal spring.
⑤ After the installation is complete, perform a leak check and test. It is usually necessary to use a pressure test instrument to detect the leakage of the sealed part to ensure the normal operation of the seal spring.
It should be noted that different models of bellows seal spring may have differences in installation, and should be operated according to the specific product manual and installation guide. At the same time, care should be taken to protect the bellows part of the “bellows seal spring” during installation to avoid damage or deformation.